NO1(China) Power Equipment Co. Ltd

Model Number: JHA10CL0 JHA15CL0 JHA17CL0 Brand Name: No1 Bearing Key Specifications/Special Features: Thin-walled bearings, cross-section bearingsThin-walled cross-roller bearingsCRA thin-walled cross roller bearings(outer ring split type) is the outer ring and inner ring wall thickness to do very thin small lightweight cross roller bearings,small and can withstand heavy load, so the equipment bearing.The installation site can be lightweight.CRB thin-walled cross-roller bearings(outer ring split type) of the inner and outer ring size is the most miniaturization,the structure of the outer ring is divided into two parts, the inner ring is one of the structural form, the most suitable for the inner ring high precision place.CRE thin-walled cross-roller bearings(inner ring split type) the structure of the inner ring is divided into two parts,the outer ring is one of the structural form, the most suitable for the outer ring rotation of high precision.Thin-walled ring bearing high precision, very quiet and very strong carrying capacity.These ball bearings have three designs and extreme small, mostly cross-section square.In these cases, even a larger shaft diameter and bearing bore, the cross section remains the same.These bearings are therefore referred to as equal section.It is this feature that distinguishes standard thin-walled ferrule bearings from standard ISO from conventional bearings.Therefore,you can choose a larger cross-section and use a bearing with a stronger carrying capacity without having to change the shaft diameter.
Thin-walled ring bearings can be designed to be extremely light and require very small spaces for bearing.

Deep groove ball bearings,four point contact bearings,angular contact ball bearings
Thin-walled ring bearings can be deep groove ball bearings (C), four-point contact bearings(X), angular contact ball bearings(E).
The above design is provided in different ways.
Depending on the size of the cross section.
Match the ball with the series.
Deep groove ball bearings can support bidirectional axial loads and radial loads.
Four point contact bearings can support bidirectional axial loads and radial loads, therefore they operate in the same way as double row angular contact ball bearings.
The angular contact ball bearings can match the optimum number of balls and have a contact angle of 30°.
They support radial loads that are higher than deep groove ball bearings or four point contact bearings and can support axial loads from the same direction.
For special needs, angular contact ball bearings can also be provided as matching bearings.
Therefore, these combinations of rigidity and carrying capacity than a single bearing products to be much higher.